====== PPP Orange ======
===== Ustawienia od Operatora =====
  * APN: **''internet''**
  * Numer dostępowy: **''*99#''**
  * Nazwa użytkownika: **''internet''**
  * Hasło: **''internet''**
  * DNS: **''dynamiczny''**

===== ppp.conf =====
Założenia:
  * port modemu: **''/dev/cuaU0.2''**

<file>
default:
 set log Phase Chat LCP IPCP CCP tun command
 ident user-ppp VERSION

 # Ensure that "device" references the correct serial port
 # for your modem. (cuau0 = COM1, cuau1 = COM2)

 set device /dev/cuau0.2

 set speed 115200
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
           \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
 set timeout 180  # 3 minute idle timer (the default)
 enable dns       # request DNS info (for resolv.conf)

orange:
 set device /dev/cuaU0.2
 set speed 115200
 set redial 5 10
 set timeout 10
 set authname internet
 set authkey internet
 set phone "*99#"

 set dial "ABORT BUSY TIMEOUT 5 \
        \"\" \
        AT OK-AT-OK \
        AT+CFUN=1 OK-AT-OK \
        AT+CMEE=2 OK-AT-OK \
        AT+CSQ OK \
        AT+CGDCONT=1,\\\"IP\\\",\\\"internet\\\" OK \
        AT+CGACT? OK-AT-OK \
        AT+CGATT? OK \
        AT+CGCLASS? OK \
        AT+COPS? OK \
        ATD\\T CONNECT"

 disable ipv6cp
 resolv writable
 #set dns 208.67.220.220 208.67.222.222 # openDNS
 set ifaddr 10.0.0.2/0 10.0.0.1/0 255.255.255.255 0.0.0.0
 add default HISADDR
</file>

===== mpd.conf =====

Alternatywnie można użyć ''net/mpd5''

Przykładowa konfiguracja do modemu Huawei E3372:

<file bash /usr/local/etc/mpd5/mpd.conf>
startup:
  # configure mpd users
  set user foo bar admin
  set user foo1 bar1
  # configure the console
  set console self 127.0.0.1 5005
  set console open
  # configure the web server
  set web self 0.0.0.0 5006
  set web open

default:
  load orange

orange:
  create bundle static B1
  set bundle links L1
  set iface name ppp0
  set iface route default
  #set iface up-script /usr/local/etc/mpd5/up.sh
  set ipcp ranges 0.0.0.0/0 10.0.0.1/0
  set ipcp disable req-pri-dns
  set ipcp disable req-sec-dns
  set ipcp disable req-pri-nbns
  set ipcp disable req-sec-nbns

  create link static L1 modem
  set modem device /dev/cuaU0.1
  set modem var $DialPrefix "D"
  set modem var $Telephone "*99#"
  set modem var $InitString "+CGDCONT=1,\"IP\",\"internet\""
  set modem script DialPeer
  set link disable chap pap
  set link accept chap pap
  set auth authname internet
  set auth password internet
  set link max-redial 0
  set link redial-delay 30
  #set link mtu 1480
  set link keep-alive 10 60
  set link action bundle B1
  open
</file>